Good detailing and adequate ventilation are key to the longevity of your roof system or wall cladding. Here at A&A Quinn, we can offer technical advice on which systems best suit your application. We can also offer bespoke working drawings. Please contact us for any Product or Technical Data Sheets DOP’s, CE Certs etc.
Metal finished Cold Deck Roof
1-Vapour control layer placed on roof deck
2-Insulation fitted between battens
3-plywood outer deck fixed away from insulation to provide ventilation cavity
4-Breather membrane is fixed to plywood deck
5-Metal of choice is fixed with standing seam clips
6-Joints are crimped to ensure no ingress of moisture through the standing seams
1-Vapour control layer placed on roof deck
2-Insulation fitted between battens
3-plywood outer deck fixed away from insulation to provide ventilation cavity
4-Breather membrane is fixed to plywood deck
5-Metal of choice is fixed with standing seam clips
6-Joints are crimped to ensure no ingress of moisture through the standing seams
Metal finished Warm Deck Roof
1-Vapour control layer placed on roof deck
2-Insulation (with or without OSB) fitted on top of VCL
3-Separation layer to Insulation or board
4-Metal of choice is fixed with standing seam clips
5-Joints are crimped to ensure no ingress of moisture through the standing seams
1-Vapour control layer placed on roof deck
2-Insulation (with or without OSB) fitted on top of VCL
3-Separation layer to Insulation or board
4-Metal of choice is fixed with standing seam clips
5-Joints are crimped to ensure no ingress of moisture through the standing seams
PVC Finished Warm Deck Roof1-Vapour control layer is placed on roof deck
2-Specified depth of insulation mechanically fitted to roof deck
3-Waterproof membrane fixed through insulation to deck
EPDM
1-EPDM is an extremely durable synthetic rubber roofing widely used in low-slope buildings
2-EPDM is available in both black and white, and is sold a broad variety of widths
3-EPDM can be installed either fully adhered, mechanically attached or ballasted, with the seams of the roofing system sealed with liquid adhesives or specially formulated tape
1-EPDM is an extremely durable synthetic rubber roofing widely used in low-slope buildings
2-EPDM is available in both black and white, and is sold a broad variety of widths
3-EPDM can be installed either fully adhered, mechanically attached or ballasted, with the seams of the roofing system sealed with liquid adhesives or specially formulated tape
Torch on Felt finished Warm Deck Roof
A. Paraflex Ard/Hs SBS 5mm cap sheet fully torch bonded
B. Technoflex NT4 SBS 4mm base sheet fully torched bonded
C. Paratherm T 80mm
D. Paratherm G 80mm
E. Adevapor AL 3.5mm SBS V.C.L laid on primed deck
F. Concentrate slab/metal deck laid to falls
A. Paraflex Ard/Hs SBS 5mm cap sheet fully torch bonded
B. Technoflex NT4 SBS 4mm base sheet fully torched bonded
C. Paratherm T 80mm
D. Paratherm G 80mm
E. Adevapor AL 3.5mm SBS V.C.L laid on primed deck
F. Concentrate slab/metal deck laid to falls
Rainscreen Wall Cladding
1-Vapour barrier fixed to substrate
2-Brackets or Battens fixed to substrate at recommended centres
3-Specified insulation thickness fitted between brackets/battens
4-Rails/battens fitted to brackets away from face of insulation to provide ventilation cavity
5-Plywood sheeting fixed to rails at recommended ctrs
6-Breather membrane is fixed to plywood sheeting
7-Metal of choice is fixed to plywood sheeting with standing seam clips
8-Joints are crimped to ensure no ingress of moisture through stand seams
1-Vapour barrier fixed to substrate
2-Brackets or Battens fixed to substrate at recommended centres
3-Specified insulation thickness fitted between brackets/battens
4-Rails/battens fitted to brackets away from face of insulation to provide ventilation cavity
5-Plywood sheeting fixed to rails at recommended ctrs
6-Breather membrane is fixed to plywood sheeting
7-Metal of choice is fixed to plywood sheeting with standing seam clips
8-Joints are crimped to ensure no ingress of moisture through stand seams
Liquid waterproofing
1-A polyurethane waterproofing system applied with a wet-on-wet roller or brush applied application.
2-incredibly versatile waterproofing system that is suited to all new build and refurbishment
3-used in the most sensitive of areas without any disruption to the building occupants.
1-A polyurethane waterproofing system applied with a wet-on-wet roller or brush applied application.
2-incredibly versatile waterproofing system that is suited to all new build and refurbishment
3-used in the most sensitive of areas without any disruption to the building occupants.
